A septic system is something that is easily forgotten until something goes horribly wrong. What should you avoid running down your kitchen sink? Is one type of toilet paper safer to use than another? How often does your septic tank really need to be cleaned? These were just some of the questions that I had about my septic tank after it had backed up and filled my yard with raw sewage. Since then, I have spent hours researching septic systems so that I would not have to go through that again. I have developed my website to make learning about septic systems a little easier for others like me.
When you get ready to do home renovations, older homes will have a lot of surprises for you. Before you dive into a home renovation project, it is good to know what you may be facing when it comes to repairs for mechanical systems. Some of the costliest surprises are found in outdated electrical systems. Here are some of the common mechanical problems that you will be likely to run into during basement finishing projects:
1. Under-sized and Outdated Breaker Boxes That Cause Problems
If you are planning on finishing your basement, one of the first mechanical improvements to look at is the electrical service. Often, older homes have little or no service for an unfinished basement. The basement electrical wiring will probably need a new breaker for the entire system of your home. If you are planning on doing an in-law suite or want the basement wiring separated from the main living area, you can have a sub-panel installed for the basement electrical systems.
2. Foundation Waterproofing, Drainage, and Plumbing Systems
In addition to the electrical systems, there are also a lot of unique plumbing needs for a basement finishing project. First, it is important for your foundation to have good drainage, which interior drainage should be installed. The foundation drainage system goes to a sump well, which is also where the plumbing systems are tied into. From the well, a sump pump is needed to pump the waste waters from your basement to a septic tank above or the main sewer line that comes from your home. These systems also need to have backflow prevention devices installed to protect from flooding.
3. The Lack of GFI Outlets
With the moisture conditions and water problems that basements are prone to, you need to have electrical wiring to protect your home. Installing GFI outlets to protect against moisture in the basement is a good idea. In addition, you may want to consider having conduit installed in the basement for wiring needs, which will also make future improvements and repairs easier to complete once you have finished the basement. The conduit can also be installed for other features such as automation and home theater systems.
These are some of the common electrical problems that many homeowners must deal with when doing renovations. Contact a foundation repair contractor to get help with the installation of drainage and sump pumps for your basement mechanical systems. For more information, contact a professional in your area or visit a website like http://www.rite-waywaterproofing.com.