learning the basics of home septic systems
About Me
learning the basics of home septic systems

A septic system is something that is easily forgotten until something goes horribly wrong. What should you avoid running down your kitchen sink? Is one type of toilet paper safer to use than another? How often does your septic tank really need to be cleaned? These were just some of the questions that I had about my septic tank after it had backed up and filled my yard with raw sewage. Since then, I have spent hours researching septic systems so that I would not have to go through that again. I have developed my website to make learning about septic systems a little easier for others like me.

learning the basics of home septic systems

Tips For Building An Industrial Workbench In Your Garage Or Shop

Matthew Young

If you have decided that you are going to spend your weekend building an industrial workbench in your garage or small company's shop, then there are many things that will make the project a success, including each of these tips:

Tip: Build a Workbench at the Right Height for Working While You are Standing Up

Building a workbench that is too tall or too short will result in back pain while you are working on projects. Since you can always adjust the height of a work stool or chair but cannot adjust your own height, you should build an industrial workbench that you can comfortably work at while standing up. One industry trip for building standing-height furniture is to measure the distance between the floor and your wrist while you are standing. Use this distance as the height of your new workbench. 

Tip: Always Use Screws to Build a Workbench Never Use Nails

If you are making your industrial-style workbench out of wood, then it is vital that you only use screws to put it together. You should not use nails for this project because the nails will work themselves loose as you put the bench under stress. When this happens, your entire bench will move from side to side when you put it under the pressure of heavy items or torque from working on a project on its surface.

Tip: Use Rigid Tie Connectors on Each Corner of the Workbench for Stability

When you are building a workbench it is vital that it is very stable. While you can add some stability to benches by adding cross and corner bracing, it is always best to install rigid tie connectors on each corner. Rigid tie connectors are metal brackets that are screwed onto the exterior corners of your bench and provide the maximum amount of stability for its structure.

Tip: If You Use Plywood for the Top of Your New Bench, Then Use Cabinet Grade

Finally, if you are going to use plywood for the top surface of your new industrial workbench, then you should only use plywood that is cabinet grade. Cabinet grade plywood will provide a smoother surface that will have a lot fewer splinters than exterior-grade plywood will. To protect the surface and ensure it is splinter-free, you should take the time to sand down all of the wooden surfaces of the new bench and seal them with polyurathane.

For more information, contact companies like Shelving Rack & Lockers Inc.


Share